PD877E_Transfer Switch
 Thermal relays have phase failure protection, temperature compensation, automatic and manual reset, and stable and reliable product performance. Thermal overload relay (hereinafter referred to as thermal relay) is suitable for overload and phase failure protection of AC motors with AC 50Hz/60Hz, voltage up to 690V, and current (0.1-6A) during long-term operation or intermittent long-term operation.
------------------
湖南湘湖V威姓詢價:HNXHDQ
------------------
鋁合金加熱器、硅橡膠加熱器、智能型電柜除濕裝置、開關狀態顯示器、智能操控裝置、多功能電力儀表、三相電流表、三相電壓表、數顯電流表、數顯電壓表、直流電流表、直流電壓表、電量變送器、導軌式電能表、微機保護測控裝置、電動機保護器、馬達保護器、微機消諧裝置、一次消諧裝置、電流互感器開路保護器、三相組合式過電壓保護器、計數器、干式變壓器溫控儀、冷卻風機、高壓帶電顯示器、帶電傳感器、軟啟動器、軟啟動柜。
------------------由于真空斷路器的特殊性能,尤其適用于頻繁操作和無油化改選的場所。戶外交流高壓隔離真空負荷開關是綜合國內現有負荷開關生產的成熟經驗及國外先進技術設計的新型負荷開關。本負荷開關由隔離閘刀,真空滅弧室及操動機構等部分組成。
湖南湘湖電器有限公司主要生產:
------[1]------數顯儀表,
------[3]------溫濕度控制器,
------[7]------微機綜合保護器,
------[8]------開關狀態顯示器,
------[7]------智能操控,
------[8]------智能除濕裝置,
------[2]------過電壓保護器,
------[6]------電動機保護器,
------[5]------軟啟動器,
------[5]------干變溫控儀,
------[5]------風機,
------------------轉換開關主要適用于交流50或60Hz,電壓至380V,直流電壓至440V的電路中轉換電氣控制線路(電磁線圈,電氣測量儀表和伺服電動機等),也可直接控制5.5kW三相籠型感應電動機(起動,可逆轉換,變速)。
智能電容器,源濾波器,微機消諧,一次消諧,變送器,浪涌保護器,復合開關,溫濕度控制器、凝露控制器、
------------------------------
HWATSND-630/4 雙電源自動轉換開關控制與保護開關電器主要用于交流50Hz,額定電壓至690V,電流自0.16A至32A的電力系統中,能夠接通,承載和分?jǐn)嗾l件下包括規定的運行過載條件下的電流,且能夠接通,在規定時間內承載并分?jǐn)嘁?guī)定的非正常條件下的電流,如短路電流。XLDS1-80N 雙電源切換開關HGKB0D-12 控制與保護開關
 The AC arc welding machine is a fully open trapezoidal moving iron split magnetic type, designed for single person manual operation with an AC arc welding power source. Suitable for welding various metal components such as low carbon steel and low alloy steel using coated electrodes with diameters ranging from 2.5 to 8mm. The AC arc welding machine is a single-phase moving coil arc welding power source designed for manual operation by a single person. Suitable for welding various low-carbon steel and low-alloy steel components. The enhanced non tuned compensation filtering unit (H-type) consists of an enhanced RCT dedicated filtering capacitor and an enhanced RTF filtering reactor, and is suitable for harsh electrical environments such as severe harmonic pollution and large voltage fluctuations. Capacitors are low-voltage self-healing three-phase power capacitors used for low-voltage three-phase reactive power compensation and filtering. This series of protectors can be connected to the power control circuit according to the diagram to provide protection. When any phase fuse in the three-phase circuit is open or there is a phase break in the power supply line, XJ3 will immediately act to control the contact to cut off the power supply of the AC contactor coil in the main circuit, thereby achieving the action of the AC contactor main contact and providing phase break protection for the load.
The AC arc welding machine is a fully open trapezoidal moving iron split magnetic type, designed for single person manual operation with an AC arc welding power source. Suitable for welding various metal components such as low carbon steel and low alloy steel using coated electrodes with diameters ranging from 2.5 to 8mm. The AC arc welding machine is a single-phase moving coil arc welding power source designed for manual operation by a single person. Suitable for welding various low-carbon steel and low-alloy steel components. The enhanced non tuned compensation filtering unit (H-type) consists of an enhanced RCT dedicated filtering capacitor and an enhanced RTF filtering reactor, and is suitable for harsh electrical environments such as severe harmonic pollution and large voltage fluctuations. Capacitors are low-voltage self-healing three-phase power capacitors used for low-voltage three-phase reactive power compensation and filtering. This series of protectors can be connected to the power control circuit according to the diagram to provide protection. When any phase fuse in the three-phase circuit is open or there is a phase break in the power supply line, XJ3 will immediately act to control the contact to cut off the power supply of the AC contactor coil in the main circuit, thereby achieving the action of the AC contactor main contact and providing phase break protection for the load.
PD877E-2SY 多功能電力監測儀表技術支持-湖南湘湖 Synchronous inspection relay is used in the automatic reclosing circuit of the two end power supply system as a voltage and synchronization inspection component. The grounding relay is an instantaneous overcurrent relay used for zero sequence overcurrent protection of high-voltage three-phase AC generators and motors in low current grounded power systems. The single loop intelligent measurement and control instrument adopts a dedicated integrated chip, and the measurement input and transmission output adopt digital calibration and self calibration technology, ensuring accurate and stable measurement, and eliminating measurement errors caused by temperature drift and time drift. XPR1-3000CN-017KW-6 Soft Starter
Synchronous inspection relay is used in the automatic reclosing circuit of the two end power supply system as a voltage and synchronization inspection component. The grounding relay is an instantaneous overcurrent relay used for zero sequence overcurrent protection of high-voltage three-phase AC generators and motors in low current grounded power systems. The single loop intelligent measurement and control instrument adopts a dedicated integrated chip, and the measurement input and transmission output adopt digital calibration and self calibration technology, ensuring accurate and stable measurement, and eliminating measurement errors caused by temperature drift and time drift. XPR1-3000CN-017KW-6 Soft Starter
PD877E-2SY 多功能電力監測儀表技術支持-湖南湘湖 This variable resistor cannot be directly connected to the rotor circuit of an asynchronous motor. It needs to be connected in parallel with a contactor or other short-circuit device before being connected to the rotor circuit of the asynchronous motor. It is an ideal starting component for equipment such as blowers, crushers, and ball mills. Control transformers are suitable for use in 50Hz/60Hz AC circuits as control power sources for general electrical appliances in machine tools and mechanical equipment, as well as power sources for local lighting and indicator lights. SMKBOF-32C Control and Protection Switch
This variable resistor cannot be directly connected to the rotor circuit of an asynchronous motor. It needs to be connected in parallel with a contactor or other short-circuit device before being connected to the rotor circuit of the asynchronous motor. It is an ideal starting component for equipment such as blowers, crushers, and ball mills. Control transformers are suitable for use in 50Hz/60Hz AC circuits as control power sources for general electrical appliances in machine tools and mechanical equipment, as well as power sources for local lighting and indicator lights. SMKBOF-32C Control and Protection Switch
PD877E-2SY 多功能電力監測儀表技術支持-湖南湘湖 Control and Protection Switchgear (CDK), mainly used for AC 50Hz, rated working voltage up to 380V, main rated current from 1A to 125A, intelligent controller adjustable working current from 0.4A to 125A, and control motor power from 0.05KW to 55KW in power systems, can carry and disconnect current or voltage under normal conditions (including specified overload conditions), and can also be connected, carried for a certain period of time and disconnected. BK-63/3P power switch
Control and Protection Switchgear (CDK), mainly used for AC 50Hz, rated working voltage up to 380V, main rated current from 1A to 125A, intelligent controller adjustable working current from 0.4A to 125A, and control motor power from 0.05KW to 55KW in power systems, can carry and disconnect current or voltage under normal conditions (including specified overload conditions), and can also be connected, carried for a certain period of time and disconnected. BK-63/3P power switch
---------------------------------
湖南湘湖電器有限公司
產品明細:
DLKB0F-12C 控制與保護開關
MYQ3-125A 雙電源自動轉換開關
SMCPS-D 控制與保護開關
RDQ1-1250 雙電源自動轉換開關
DJQH2A-1250 雙電源開關
RMS1-055 軟起動器
GTQ3-225/3 雙電源自動轉換開關
LZR1-225 軟啟動器
RMKBOG-100 控制與保護開關
GTKBOD-80C 控制保護器
JDKQ30A-225/4 自動轉換開關
YEKB0CPS-32 控制與保護開關
SKZ3-200 軟起動器
GTCPS-32 控制保護器
DJKBOZ 控制與保護開關
KCQ2-250A 雙電源自動轉換開關
YEKBOJ-16C 控制與保護開關
HCPSKB0-32 控制與保護開關
SMQ1-1250 雙電源自動切換開關
FATSD-225/3P 雙電源自動轉換開關
TKMK1S-45C 控制與保護開關電器
HWATSND-63/3P 雙電源自動轉換開關
SMQ7-200A 雙電源自動切換開關
TRQ3-400/3 雙電源開關
WCA8G-200A 雙電源自動轉換開關
LPQ3WR-125 雙電源自動轉換開關
SMCPSN-125C 控制與保護開關
MYQ1-800/3P 雙電源自動轉換開關
ALYQ6-40A 雙電源自動轉換開關
TRQ2-125 雙電源開關
SGR3-320 軟起動器
YES1-1000A 雙電源自動轉換開關
CRJR1-S-55KW 電機軟起動器
JJR2-030-S 軟起動器
JDKQ30A-225 自動轉換開關
BDCPSN-100 控制與保護開關
JDKQ30-800/4P 自動轉換開關
TLCPSS-80 控制保護器
CRW1-6300/4000A 式斷路器
FATSQ1-63/3P 雙電源自動轉換開關
------------------
生產廠家:湖南湘湖電器有限公司
生產代碼:hnxhdqxgg